Request: Manual Driveshaft meassures! Front Section!

[Lopin18]

Please!!!

I would like someone who could plz meassure in MM a part of the s13 Manual driveshaft.... i only need the meassures of tip that hooks into the transmission.... front secction, the polished part (the tip that goes into the transmission,polished tube)

Please take a pic if u can and indicate where to where u messure it

anyways i need these mm measures...:

- the length of the whole front section and the lenght and width of the polished tube- the opening of the female thing (the hole in the silver tip, or polished tube) that hooks into the transmission- the width of the silver tube (or the polished tube! whatever )

Sry if its misunderstood :P its all based on the tip that hooks on the transmission so u should figure out what im pointing

Cause i cant get the damn driveshaft here in my country, so i have to find a Tip to weld into my old auto ds, and the one i welded had Play.... seems like its too wide to go FULLY into the transmission, and it moves too much.... so i guess its either the female hole that hooks that its too wide, or its the silver tube that is too long or wide, or something

Please that would do me GREAT help, im sick of searching for the DS....

Please someone do me this one favor I need the specs to find a perfect matching tip....

Modified by Lopin18 at 4:33 AM 2/8/2008

Modified by Lopin18 at 4:42 AM 2/8/2008
Modified by Lopin18 at 4:44 AM 2/8/2008

[Lopin18]

im gonna regret posting this pic lol, the ds has already been cut to the correct lenght, now the thing is the damn polished tip or Coupling as they call it here

This is sort of what i need

[Lopin18]

Nevermind! my transmission had something crushed in there, we just hammered the Driveshaft a lil and it went it perfectly!!!