replacing water pump on '97 KA, any tips

ONLY for ADVANCED technical discussion about the 240sx!
khilgers
Posts: 127
Joined: Sat Jun 21, 2003 7:27 pm
Contact:

Post

I'm gonna replace my water pump today and I was wondering if you guys had any tips for the install. I did a search and found that I need to clean off all of the old gasket really well and bleed the coolant line, but is there anything else I'm missing. Also, do I need to go to Nissan for a gasket or do you just use some kind of sealant that you can get at an automotive store?


MikeMurphy
Posts: 824
Joined: Sun Feb 23, 2003 12:20 pm
Car: Guess
Contact:

Post

http://northwestnissans.com/bo...11141

maybe that will help a bit.

khilgers
Posts: 127
Joined: Sat Jun 21, 2003 7:27 pm
Contact:

Post

Ok new problem I ran into. I'm no mechanic but I am bound and determined to do this myself. I loosened the hinge bolt for the alternator and the bolt that holds tension on the belt, but it's not taking off enough tension to remove the belt. Am I missing something?:help


Return to “240SX Technical Forum”