replacing rotors on 97 nissan pickup

[ucd_4_life]

im trying to figure out how to remove the rotor. do i need a slide hammer to remove the hub or should it just unbolt.will i need to seperate the bearing and repack it? any help would be great. visuals, a website i could go to for anymore help. thanks

[Rev_D21]

You will need to remove the grease cap, remove the outer bearing and such before the hub assembly will slide off the spindle.

[Desert Rat]

You don't need a hammer.

when putting this back together, it's critical you torque the hub nut appropriately.

You might go drop $15 on a Haynes manual at the parts store for the step by step and photos if you haven't done this before.