Replacing rear turbo line on T25, any ideas??

[RalliartRsX]

Well, I am about to tackle the problem of reeaching to my rear turbo line and ofcourse, same like the SR, its right between the rear of the block and the firewall (although not as tight as the SR, seemingly). I have managed to remove a few lines above the turbo line along the firewall as well as unplugging the hardline from the feeder hose right below the rear of the intake manifold. Now, the rear line is held on to the block by a clamp and it seems the clamp has to be removed in order to remove the hardline.

There is still, however, one bolt that is holding the clamp in place. Any ideas of how to remove this clamp and not have to remove the enntire intake manifold??

Thanks, Chris

[float_6969]

Because IDK WTF you're talking about. I thought I only had 2 bolts on the back of the head, and that's it. I could be wrong because that was a long time ago. I hope you're converting to SS lines...

[RalliartRsX]

I bought Taka lines if that says anything

As for pics, well, might be difficult. I will see what I can do.