Replacement Slave Cylinder

[DammitBobby]

Major PITA if you keep this. I replaced my slave cylinder that was leaking and could not bleed my clutch line but as soon as I got rid of that piece of CRAP it worked immediately.

[574-240sx]

I got rid of it to and made a hardline. Works much better now.

[240sxHitman]

Ive got a nismo slave cylinder and just wondering how hard is it to install. i know you have to bleed the clutch line but ive never done that before

[R240sx]

Shouldnt be to hard, i had to replace mine, but i replaced with a oem slave, all i did was remove like 2 bolts and it came off.

[DammitBobby]

Real easy install its the bleeding the line out that is a PITA. I would recommend ditching that part that is in the picture.

[rudee023]

Ditch the part in the picture and bend the hardline 180 degrees to fit. Becareful not to kink it. Bleeding should take about two minutes. Be sure and spring for OEM slave cylinder from the dealer. I have known of at least 2 instances where a PepBoys special has crapped out within 6 months.

[wickedpelf]

PDM racing has one for 14$ but u have to pay a 6$ "fee" cuz its only 14$ and u have to have ateast 20$ before tehy will ship anything...to the US

[Ramius83]

Ahhh, speed bleeders work like a champ. One person job, 5 minutes tops, and done.

Russell's Speedbleeders or Earl's Solo-Bleeders

Size/Thread = M7x1.0, any length