removing z32 spoiler

Post by **boostloading** » Fri Jul 19, 2013 2:41 pm

Hello, can anyonw show me pic. Etc. Of how to remove an oem 91 300zx spoiler? And

Post by **RED_DET** » Fri Jul 19, 2013 3:33 pm

Fairly simple... you will have to first remove the inside trunk panel to gain access to the bolts. From there is should be self explanatory.

Post by **Ace2cool** » Fri Jul 19, 2013 4:37 pm

The 91 will be held on with adhesive as well. If you don't have a body guy already lined up to fill the holes/repaint the hatch, I'd leave it be.

Post by **boostloading** » Sat Jul 20, 2013 10:06 pm

I took off all the boltz but its still having a really hard time coming off! Any clues? Dont want to wreck it too

Post by **RED_DET** » Sat Jul 20, 2013 10:12 pm

The adhesive will be a pain the as$... Take some fishing line and run it up under the spoiler.

Post by **boostloading** » Sun Jul 21, 2013 2:02 am

RED_DET wrote:The adhesive will be a pain the as$... Take some fishing line and run it up under the spoiler.

U
Thanks

Post by **nissanfreak12** » Sun Jul 21, 2013 7:01 am

Heat gun will also work, just be careful with it, it WILL damage your paint if you get it too hot or too close.