Removing the S14 grill--pardon my ignorance

ONLY for ADVANCED technical discussion about the 240sx!
MarkEmark
Posts: 1857
Joined: Sun Aug 25, 2002 6:25 pm
Car: fully-built '95 240sx KA-T
Contact:

Post

I feel stupid for asking such a simple question, but how the heck do you get the S14 grill off? Theres 4 screws that you can unscrew, but after that, the grill is just as secure as it was before. I see from pictures that the grill has 3 mounting tabs on them....how do I get access to these three mounting tabs? Do I have to remove the bumper or anything like that? ThanksmARC


MaineExport
Posts: 3784
Joined: Tue Jul 23, 2002 3:27 pm
Car: 95 Nissan 240SX FAL fans AEM intake Hot Shot header Apexi N1 dual Exhaust VLSD ABS NX 50 shot

Post

There are three tabs under the grill and bumper. It's not easy, but you need to position a pry bar under them. Then just pop them straight up through the bumper. It's kind of a pain in the a$$.

MarkEmark
Posts: 1857
Joined: Sun Aug 25, 2002 6:25 pm
Car: fully-built '95 240sx KA-T
Contact:

Post

So you have to go from underneath the bumper and push it up? Which means I'll have to remove a lotta stuff, no?Ahh, such a PIA...why couldn't they just make the tabs release with a 1/4 turn like most other cars do?!?

Nismo_Freak
Posts: 10314
Joined: Wed Jul 24, 2002 10:42 pm
Car: 89 Nissan 240SX

Post

just pull it off...

yeswepromise
Posts: 1853
Joined: Sun Dec 15, 2002 10:12 pm

Post

i just ripped mine out. broke the middle tab off but thats okay.

MaineExport
Posts: 3784
Joined: Tue Jul 23, 2002 3:27 pm
Car: 95 Nissan 240SX FAL fans AEM intake Hot Shot header Apexi N1 dual Exhaust VLSD ABS NX 50 shot

Post

MarkEmark wrote:So you have to go from underneath the bumper and push it up? Which means I'll have to remove a lotta stuff, no?


Nope... just go in from the top... use your finger and feel around between the bumper cover (plastic) and the bumper frame (metal). You'll feel three little nubs of the platic fasteners.... just position a small pry bar under them (one at a time obviously) and pop them up.

MarkEmark
Posts: 1857
Joined: Sun Aug 25, 2002 6:25 pm
Car: fully-built '95 240sx KA-T
Contact:

Post

maineimport wrote:Nope... just go in from the top... use your finger and feel around between the bumper cover (plastic) and the bumper frame (metal). You'll feel three little nubs of the platic fasteners.... just position a small pry bar under them (one at a time obviously) and pop them up.


Ahh, i see maine import, i know exactly what you're talking about!Thanx man, Marc

MaineExport
Posts: 3784
Joined: Tue Jul 23, 2002 3:27 pm
Car: 95 Nissan 240SX FAL fans AEM intake Hot Shot header Apexi N1 dual Exhaust VLSD ABS NX 50 shot

Post

No problem.... you're welcome.


Return to “240SX Technical Forum”