removing door insert on 3rd gen

[PBfrEAk]

I've finally aquired all my compontents for my system I'm gonna put in my Max.

I need to know how to take the front door inserts off. Ive got them almost completely off except for right around the buttons for the p/w and p/l. Is there a certain way to do it? does that plastic piece around the buttons come off or what?

I didnt want to just start pulling and break somthing so i figured id jump on here and ask the pros lol

thanks much...once its all installed ill post pics off the final product!! thanks again

Cody

[internetautomart]

I've finally aquired all my compontents for my system I'm gonna put in my Max.

I need to know how to take the front door inserts off. Ive got them almost completely off except for right around the buttons for the p/w and p/l. Is there a certain way to do it? does that plastic piece around the buttons come off or what?

I didnt want to just start pulling and break somthing so i figured id jump on here and ask the pros lol

thanks much...once its all installed ill post pics off the final product!! thanks again

Cody

if you already have the door pull off and the panel off the door it's just a matter of popping up the front part of the bezel for the assembly to come out of the door.

[MinisterofDOOM]

Yeah, just go ahead and pull on the front of it. It's held in place by springy retaining clips, so you won't break anything assuming the door panel is completely removed, and the screw has been removed from the door latch "hole" in the bezel.

[PBfrEAk]

The SCREW!! lol that was what i missed!! I had it all off except for right there and i wasnt sure what was holding on because i couldnt see behind there. thanks alot guys...such genius's lol

like i said before...ill have this done before the end of the week more than likely so ill post pics of the final product this weekend

thanks