removing and switching coolant temp sensor.

[Eternal_240sx]

Well i just started the sr a couple of days ago and i immediatly after a couple of minutes of the engine on idle the temp on the cluster would go all the way to "H". i understand that you need to change the ka coolant temp sensor to the sr when swapping s13 sr to s14. First the 2 wire one is for the ecu and the single wire is for the gauge cluster correct? And all i need to do is switch the gauge cluster sensor with the redtop cluster sensor correct? My main question is how i would go about removing the sensor from the KA? And installing it into the sr.

please help

thanks...

[fliprayzin240sx]

theres two colored sensors...a red/pink one and a black one, you need to swap the black one out. The SR one pumps out a different resistance thats why you need to swap the KA one in.

[navysnail]

and dont do it when hot, and bleed when you are through