removing 240sx badge on an S14

[khilgers]

I was thinking about taking off the 240sx badge on my '97, but I just wanted to make sure that there is nothing behind it. In previous cars there were 2 holes for pins, like most front emblems. Are there pins holding in the rear badge or is it just tape?

[tex240]

nope nothing there mine is off. just use goo gone and some floss. he only thing is the badge chipped the clear coat from using a power washer and had an outline of 240SX. looks clean with out the badge though.

[pgt892]

Yeah it comes right off with floss leaving nothing behind except for the sticky stuff behind it. I used a hair dryer on the sticky stuff and it eventually all came off.

[240sick]

what about the rear emblem is that the same procedure as listed already

[89240sx]

anybody ever figure out how to get the 240sx logos off the quarter windows in the back?

[extheflow]

the emblem on the center garnish has 2 holes behind it. they are small though.

[chmercer]

dont be a tool, leave your emblems where they are.

[fastblue240sx]

I'm trying to find badges to replace the ones that were stolen off of my car. Does anybody know where to find good replacements on the low?

[240sick]

ebay knows all

[SilviaS14KA24DE]

instead of buying replacement badges, go JDM! Jspec.com has the JDM emblems for s13, 14, and 15.

[Bunta240]

Why?? JDM badges are more expensive. IMO, its better to have a JDM car on the inside then the outside.

[driftaholic]

the logos on the quarter windows are acually cut out of the black so the silver shows through (i took a hammer to an already broken one in a junkyard to figure this out). so it's basically impossible to get rid of it

[fastblue240sx]

OK. I figured the JDM badges would be more expensive, but I like the JDM Silvia badge a lot. I'll have to check out the Jspec website. Thanks guys.

[fastblue240sx]

I just checked the website for the badges. There's a lot of great stuff there. Thanks for the tip.