removed emission - electrical connections?

[Tiger51]

I've done a search but couldn't find a good answer.

After removing the emission bits, as per this sites instructions-http://www.ka-t.org/forums/viewtopic.php?t=10789

What do you do with the electrical connections? Do you just leave them unplugged and dangling? Or do you remove the connector and wire the wires together?

[TDS]

The only thing I've removed from emissions is the AIV and otherwise the AC. Both had some kind of electrical connections but i just ziptied them somewhere to keep the engine bay clean. You don't want wires dangling around and its probably better to leave them alone to keep your harness complete.

[Tiger51]

The only thing I've removed from emissions is the AIV and otherwise the AC. Both had some kind of electrical connections but i just ziptied them somewhere to keep the engine bay clean. You don't want wires dangling around and its probably better to leave them alone to keep your harness complete.

My bad, I guess "dangle" was the wrong word. So I just leave all the connections disconnected then? Gotcha...I've already found a few other connectors that are not connected, so adding to that number won't hurt.