Reliable Place to Buy SR20DET Motorset

[Escape180sx]

just wondering where is a good place thats has a good rep. for selling SR20DET...also, how much do motorsets go for??

[BomexS13]

phase2motortrend.comsrswap.com( Heavy Throttle)

[djsonic]

heavythrottle.com

[getnrowdy23]

heavythrottle.com

[Project S13]

So if one were to buy a complete swap (not the swap package for 4K) say a red top for 2500+shipping, does that have *everything* to get it running minus an intercooler? The wording on thier site is a little confusing because they talk about *complete* engine sets and yet I know from how much I have read on this subject (anything I could find on google and several how-to's) that you ALWAYS need to buy more than what is included with any company's "complete" swap.

Since you guys recommend them so highly (I'm referring to srswap.com) I hope you will shed some light on that.

[getnrowdy23]

call them and ask. they are pretty good. i dont remember what all came with mine, bc i didnt use half of it. i upgraded a lot

[Project S13]

cool. I did send them an email to check. Thanks for mentioning that you bought one from 'em. Just recommending a place vs recommending and you bought from there yanno. good stuff.

btw, did they say anything about the mileage on the engine? Typically there is the whole 30-60k or something but that is a massive range and a big difference. Do you know what your mileage was when you got it or what they said the range was?

[SR20DETPoweredS14]

240SXMotoring is also a good place... and if you buy the motor itself you'll only really need a Hotpipe, an Intercooler and a downpipe and maybe some other things that im forgetting about for it to run.

[Escape180sx]

thats for the info!

[WONit]

i just got my engine yeatserday that i ordered frm srswap its pretty much a clean engine accept it looks like there has been some work done to the bottom end becouse there is a whole lot of gasket sealer on it im gonna have to pull the oil pan and take a look at it.there customer servive is A++

[NoTcHbAcK240sx]

project s13 what did they say about the 2500 price? is that the whole deal? or what..

shift_smoked

[cheez80]

take a look at g-dimension, too.

james is a really good guy and really knows his chit.

[f150intally]

i just got my engine yeatserday that i ordered frm srswap its pretty much a clean engine accept it looks like there has been some work done to the bottom end becouse there is a whole lot of gasket sealer on it im gonna have to pull the oil pan and take a look at it.there customer servive is A++

nissan uses gasket sealer from the factory. they do not use gaskets between the oil pans, etc.

[dropem low]

2500

So if one were to buy a complete swap (not the swap package for 4K) say a red top for 2500+shipping, does that have *everything* to get it running minus an intercooler? The wording on thier site is a little confusing because they talk about *complete* engine sets and yet I know from how much I have read on this subject (anything I could find on google and several how-to's) that you ALWAYS need to buy more than what is included with any company's "complete" swap.

Since you guys recommend them so highly (I'm referring to srswap.com) I hope you will shed some light on that.

2500+shipping is high for a engineset you can get a front clip for 2899+ shipping from jarco call them and ask them how much for a motorset or just wait and i will tell you tomorrow me and some freinds are going to get one tomorrow and i will let you know how much and what all goes with it. mike from there is going to japan this week to get some more he drives everycar before they cut them up and ship them to there shop i have seen several clips from them and there nice.there are located in atlanta,ga.

[NiSmo240luvR]

yes call jarco...they are top notch and have excellent customer service...

[Roll'N on HE's]

dropem low were u able to find out how much motorsets cost from them? i was thinking bout asken them.

[Project S13]

ah 2500 was most of the things you'd need, I think it was just minus the IC, hotpipe, and downpipe like SR20DETPoweredS14 said.

They have a list that covered it at thier SR FAQ, which is basically what they told me. There are plenty of things that they suggest you do also, like a new clutch kit and some other junk like that, but I think they are saying so under the assumption that you will be pushing boost from the start. If you were to keep it at stock 7 until later there would be no need that I am aware of to replace all the things they say. I'd just go with an IC setup, the hotpipe and downpipe, and a BOV.

here's the link:

http://srownersclub.com/faq/faq_needed.asp

[phreze]

http://www.phase2motortrend.comI got my engine from there and you get everything for $2500. They also have an upgrade package that replaces alot of things that are commenly not in the best condition.

[wylin]

2 place i would buy clips from are

http://www.sr20store.com owned by marco vargas they have a steady supply of 4-5 engines every month and are a very reputable seller in socal. also they have a large supply of used parts for sr rwd/fwd and RB.

http://www.phas2motortend.com they are personal friends and they have very good customer service and quality clips

[ChachiS13]

I got my S13 Blacktop from http://www.customcarperformance.com . I got it real fast and the engine was really clean and unmodified. Stock clutch etc. It runs beautiful. Motor set is 2700 shipped. Came with everything, all I needed to buy was FMIC, hot pipe etc (the usual to complete swap) and I used the MAF from my SOHC.

there was a real clean CA18DET there last week which was sold to a customer and the motors they had there all look clean

[tsredalert]

Phase2Motortrend. They take really good care of their customers...