Rebuilt my starter wiring issue

Got questions about your Nissan? We're here to help, and it's FREE!
User avatar
Artigo
Posts: 43
Joined: Wed May 20, 2009 1:31 pm
Car: 1993 240sx coupe SR20
Contact:

Rebuilt my starter wiring issue

Postby Artigo » Mon Aug 22, 2011 4:29 pm

Stupid question, but.. which bolt on the solenoid do I hook the power cable to and which bolt do I hook the wire running from the base of the starter motor to? I tried one combination and when I hooked it up to power it started spinning freely so I disconnected it and I'm not sure how it should be wired.


MaximA32

Re: Rebuilt my starter wiring issue

Postby MaximA32 » Thu Aug 25, 2011 6:56 pm

Well, if you hooked it up one way and it started spinning on it's own, try the other way as chances are that way is correct.

User avatar
Artigo
Posts: 43
Joined: Wed May 20, 2009 1:31 pm
Car: 1993 240sx coupe SR20
Contact:

Re: Rebuilt my starter wiring issue

Postby Artigo » Sat Aug 27, 2011 3:19 pm

I switched the positions and it's not spinning when it gets power, however I'm not getting a crank and the solenoid is getting hot. What does that mean exactly?


Return to “Nissan Online Mechanic”