Rebuilt Ka24e with serious idle problems

ONLY for ADVANCED technical discussion about the 240sx!
mlgziggy1990
Posts: 10
Joined: Sun Jul 14, 2013 6:58 pm
Car: 1989 Nissan 240sx hatch s15 sr20det
1989 Nissan 240sx coupe ka24e

Post

Ok so I put a new head gasket and timing chain on my 89 Nissan 240sx couple with cruise control, and finally got the timing set right, but the car idles at 2100rpm and when but in neutral it bounces off the rev limiter and wont go down, don't know what the issue could be and if anyone has had this problem please let me know.


User avatar
jbracy7
Posts: 1039
Joined: Sat Jan 13, 2007 8:39 pm
Car: 94 GTS TYPE-M in a dozen pieces
Location: S.A. TX

Post

u might have to redo the whole thing

mlgziggy1990
Posts: 10
Joined: Sun Jul 14, 2013 6:58 pm
Car: 1989 Nissan 240sx hatch s15 sr20det
1989 Nissan 240sx coupe ka24e

Post

Redo the whole thing? But how would I know what to do differently if I don't know what the problem is?

big monkey racing
Posts: 168
Joined: Tue Nov 06, 2007 3:38 pm
Car: 1990 240sx

Post

i would check the cables for cruise and see if its pulling ur throttle plate open causing the engine to rev up. lmk what you find.

mlgziggy1990
Posts: 10
Joined: Sun Jul 14, 2013 6:58 pm
Car: 1989 Nissan 240sx hatch s15 sr20det
1989 Nissan 240sx coupe ka24e

Post

That's a decent idea, I will try after work and see what I can find

mlgziggy1990
Posts: 10
Joined: Sun Jul 14, 2013 6:58 pm
Car: 1989 Nissan 240sx hatch s15 sr20det
1989 Nissan 240sx coupe ka24e

Post

So i unhooked the throttle cable and cruise cable and it idles fine, didn't rev up in park but had good throttle response in neutral, so what would be my issue, adjust the cables?

big monkey racing
Posts: 168
Joined: Tue Nov 06, 2007 3:38 pm
Car: 1990 240sx

Post

i would try that it seems that they were too tight pulling the throttle open

mlgziggy1990
Posts: 10
Joined: Sun Jul 14, 2013 6:58 pm
Car: 1989 Nissan 240sx hatch s15 sr20det
1989 Nissan 240sx coupe ka24e

Post

Ok I will try it sometime today and see what I get


Return to “240SX Technical Forum”