rear sway bar d bracket bolts

[EstoMax]

hey got a question

i got my ST sway bars and it comes expecting me to have a rear swaybar already. so i dont have the bolts for the rear swaybar that hold the d-brackets on the frame.

so im gonna have to go to home depot or something to get some

can someone tell me what size/specs on those bolts are?

thanksmax

[NISTECH]

its likely one of 2 sizes. its either a 8x1.25 thread or a 10x1.25 thread. probably about 1.5 in in length.

[EstoMax]

k cool thanks ill go buy each in home depot and find out : )

if someone could measure theirs if its out that woudl b great if u see the thread anyway

max

[EstoMax]

ok so i determined that its a 10mm bolt.. not sure if its 1.25 tho r u sure? ill go try a wrench but by hand it only goes in about one thread easily, could be the 10 years of gunk that built up inside tho

max

[NISTECH]

Japanese cars use 1.25 pitch thread standard except when it comes to engine to trans bolts and heavy braket bolts to the block.

europe cars use 1.5 pitch threads typically.

[EstoMax]

ok then its gotta be 10x1.25. cause i ran the 8x1.25 along the thread even tho its small it seemed to thread along the edge nicely.

time to install my rear sway after i buy 3 more of these bolts.

thanks!Max