Rear Bumper bolts on S13

[KAWhat]

I have a 91 240sx hatch and I'm attempting to take off the rear bumper cover, not the reinforcement bar. How do you get to all the bolts?? I've taken the front off many times with no problems, but I just can't find how to get the rear off

[nothing]

1st post. I hope I can be of some help. I removed my rear bumper a while back. I believe there are three bolts on each side lined up vertically. Pretty sure they're 10mm. You can get to the ones on the drivers side by going through where your jack should be stored. The two top ones are pretty easy to get to but the third might be a little harder. It is a little different to get to the ones on the passenger side. Again, the two top ones are a little easier than the third bottom one. I had to remove a black plastic air vent looking thing to get to the third one. I don't remember if the vent thing was screwed on or if it just snapped out. I'll go take a look right now. Hope this is of some help.