Hello, I've got a 1993 KA Convertable that I'm straightening the drivers front corner on. Unfortunately, I wasn't the one who pulled the bent fender and bracing apart, but somehow got roped into putting it all back together.I'm unsure of where the two inner braces attatch and how the stock air filter assembly/fuse box attatches- I could REALLY USE A PHOTO of that front corner area (again, drivers side)inside and outside . Hopefully the new headlight assembly will be obvious as to how it bolts in. Can you help????
I got this as payment for a debt and need to get it sold right away. Sincerely thankful for any pics. Nitro!!!!
Really Need Picture of front inner fender area...
any more specifics on the two braces you're talking about? Stock air filter assembly has two metal brackets that have rubber mounts that slip through the metal brackets and the air filter sits on those rubber mounts.
The fuse box at the front has a L shaped piece that slips into a small square cut out. Then there's a small clip that goes through the back of the box through the sheet metal and out the other side.
The fuse box at the front has a L shaped piece that slips into a small square cut out. Then there's a small clip that goes through the back of the box through the sheet metal and out the other side.
-
neagan
- Posts: 105
- Joined: Thu Mar 11, 2004 5:28 pm
- Car: 2002 Q45 * 2001 QX4* 2008 G37* 1988 IROC* 1941 Dodge Army Trux* Racecars
Re: (180fan)
Yep, that's gotta be it. One brace is about 16 inches long, kinda slender and has a wave to it, the other is more of a solid metal with two bolt holes on one end. That entire corner including that black rectangular plastic air box and the air filter housing itself had been crushed..... Thanks, Nitro