READ HERE BEFORE POSTING, RB Swap & Parts Info

Post by **WDRacing** » Tue Apr 05, 2005 6:03 am

In an attempt to unclutter the forum I consolidated all the fantastic stickies you guys have made. If you'd like to see somthing else added to the list, please post the link here.

WD

Please click this link for posting hintshttp://www.penguinsstealmysanity.com/posting.html

ALL RB series FSM's (factory service manuals)http://nicoclub.com/FSM/rb

RB series replacement partshttp://forums.nicoclub.com/zerothread?id=34102

RB Belt Sizes (Suppliment to above)zerothread?id=119087

Collected RB20 Swap info into a S13http://forums.nicoclub.com/zerothread?id=92829

What turbo for X horsepower charthttp://forums.nicoclub.com/zerothread?id=143781

Your 8 step program to starting your RB25http://forums.nicoclub.com/zerothread?id=18442

RB25 swap into an S13http://forums.nicoclub.com/zerothread?id=74575

R33 Gauge Cluster into S14 How Tohttp://forums.nicoclub.com/zerothread?id=167369

B&M Shifter Install On RB20http://forums.nicoclub.com/zerothread?id=112010

RB to KA tranny Swaphttp://forums.nicoclub.com/zerothread?id=100401

Retrofit USDM J30 igniter to RB20/25 (series 1)zerothread?id=116502http://forums.nicoc ... ead/251366

RB overheating solutions zerothread?id=262601

RB26/NEO 25 push to pull conversion using usdm partshttp://forums.nicoclub.com/zerothread/283159

Post by **rbsileighty** » Wed Sep 21, 2005 8:25 am

Other great resources:

http://www.rb20det.com/

http://www.meggala.com/main.htm

Post by **oneslow240se** » Sat Nov 12, 2005 6:27 pm

this is what i been searching for for the last few days...... i was more interested in this :

RB25 swap into an S13http://forums.nicoclub.com/zerothread?id=74575

i knoe there are other post but mostly in bits and pieces but since this is pretty good write up i thought i check it out ...... noticed that the date created was last yr 4/04 more then a yr ago i was wondering if there are any updates to this since swaps are more common and maybe even ways of cutting cost without sacraficing anything...

Post by **Joe** » Sat Nov 12, 2005 6:37 pm

oneslow240se wrote:this is what i been searching for for the last few days...... i was more interested in this :

RB25 swap into an S13http://forums.nicoclub.com/zerothread?id=74575

i knoe there are other post but mostly in bits and pieces but since this is pretty good write up i thought i check it out ...... noticed that the date created was last yr 4/04 more then a yr ago i was wondering if there are any updates to this since swaps are more common and maybe even ways of cutting cost without sacraficing anything...

that one is already in the FAQ

Post by **Kansei240sx** » Sat Nov 26, 2005 10:24 am

Here is also a site i'd like to link to acknowledge someones work on this forum and Hybridz.org Great RB25DET write ups.

http://www.livesockets.com/quoc/rb/RB25DET

Post by **240droptop** » Sun Feb 26, 2006 11:20 am

what about info on swappin in an rb26dett into a lhd s13 my main question is on downpipes thanks

Post by **silvia_ca18det** » Sat Mar 25, 2006 9:22 pm

240droptop wrote:what about info on swappin in an rb26dett into a lhd s13 my main question is on downpipes thanks

tyler dont u woorry chief....when we do ur swap if the downpipe is an issue i cal just make u a custom on eout of stainless

Post by **sean8564** » Thu May 18, 2006 4:21 pm

http://72.29.75.31/~videof6/ma...l.pdfGTR service manual

Post by **Tripz** » Wed Oct 04, 2006 5:22 pm

The service manual for the R33 seems to be not working anymore. Anyone have one that they can post up? RB25DET to be exact.

Post by **gte** » Tue Oct 24, 2006 3:51 pm

Can you reupload this please?

sean8564 wrote:http://72.29.75.31/~videof6/ma...l.pdfGTR service manual

Post by **Evo_bill** » Fri Dec 01, 2006 7:43 am

ANYONE have the ARP part numbers for Mains,Rods, and Head bolts?

Post by **Booztd 3** » Sat Feb 03, 2007 4:17 pm

Nissan GTR RB26DETT ARP2000 head stud kit - 202-4207

For the Main-Studs, we usually use the SR20 Kit - 202-5402

For the Rod Bolts, the VG30 should work - 202-6004

Post by **clovers525e** » Fri Feb 09, 2007 3:32 pm

this is a wireing guide for wireing a rb20det into a 95 s14. i dont know how different it is for the 96 and up but i will post a write up after i do mine if there is any differences. i spent a few weeks looking off and on for this and found it on page 37 of a google search, so enjoy.

http://s92978298.onlinehome.us/RB/GTR_plugs.pdf

Post by **Monkey87** » Tue Apr 03, 2007 8:59 am

What about info on an RB20DET into S14 swap? Found a few things here, but really looking for all the help I can get. It's my first swap, and I want to do it right. Thanks.

Post by **adam-gtX** » Fri Oct 19, 2007 4:07 pm

Is anyone else having a prob downloding the r32 service manual (all motors) I never have any problems downloading pdf's but It keeps saying error with te site. Is there aother place I can download this from?

Post by **yotik** » Thu Jul 17, 2008 11:32 am

Hi i know im a newbie, let me just say im blown away by all the info on here thanks! But I cant seem to find any info on if the RB tranny will clear s13 zenki chassis. Should I use the RB tranny or go with the ka? Also I have read about the mounts and I want to make sure it clears too. For a number of reasons im trying to avoid cutting the firewall if possible. Any info would be excellent!

Post by **Coolwhip** » Thu Jul 17, 2008 3:17 pm

good job going to the stickies. Bad job posting it here.

No prob, there is a FAQ sticky that should have this info in it.

However, the RB's have different transmissions including dimensions. your KA tranny will not bolt on to the RB. Most of the time 9.5/10 you'll need to hammer in the firewall to clear the edge of the bell housing and starter hump.

Depending on what route you go for mounting, OEM or kit, will determine what mounts are used and such.

Alittle more research and you're on your way.

Post by **lucky7** » Thu Jul 24, 2008 6:29 am

i cant add to the belt page, so ill put it here.

goodyear gatorback # 4030325 for RB25 P/S. shorter than what i had, but i just installed it, and it works. not to tight, IMO. i have 3 rib crank and 3 rib p/s pulley.

BTW, i used Kamin's part # for the Gates belt, and went to Murray's. they didnt have it in the system. so they cross refrenced it, and i ended up with the goodyear.

its awesome. the packaging has a 'nascar performance' logo on it. for teh winn.

Post by **tnd240** » Wed Aug 06, 2008 8:59 pm

If anyone would have the OEM Turbo Specs for the RB, I would appreciate it. Please email me at [email protected]

Post by **240z4u** » Fri Nov 21, 2008 1:33 pm

Front/center countershaft bearing for rb25det, z31t, and z31 trans

NTN - 7E-HR0724

Took my bearing guy awhile to figure this out, the number on the bearing that is already in the trans is obsolete.

Evan

Post by **smitty4130** » Tue Apr 28, 2009 1:11 am

When swapping from a Auto KA to a RB20DET can you re use the original drive shaft of the auto ka?

Post by **Tofubadguy** » Sun Aug 02, 2009 7:03 pm

This sticky is really great & thank you. I have scanned through it before & found some help to some of my questions, but now that I finally have a RB26 it has been very helpful.

And the R32 service manual... priceless!

Russell

Post by **EJ8 944** » Tue Oct 13, 2009 2:06 pm

I couldnt come up with anything in the search, and I hope I can get an answer in here.

What are the ways to tell an R32 spec RB26 from an R33 spec?I know to look for the grey plug by the fuel rail, and the oil cap, but are there any other ways to tell?

Post by **StockAsFuhS14** » Sun Nov 18, 2012 7:57 am

great thread, i wish there was more s14 swap info

Post by **xXe7ernalXx** » Sat Mar 16, 2013 12:53 pm

Hey just wanted to let you know the link for the rb20/25/26 fsm is broken. Anyone looking for it you can find here for free. http://www.aspecperformance.com/nissan- ... p-512.html

Post by **Arby's** » Sun Apr 06, 2014 2:22 pm

i have been asking around, but figured id post it here too. anyone done the RB26 swap on a R34 GTT. im stuck on the wiring currently

READ HERE BEFORE POSTING, RB Swap & Parts Info

RB Parts and Swap Info

Re: RB Parts and Swap Info (WDRacing)

Re: RB Parts and Swap Info (WDRacing)

Re: RB Parts and Swap Info (oneslow240se)

Re: RB Parts and Swap Info (Kamin)

Re: RB Parts and Swap Info (Kansei240sx)

Re: RB Parts and Swap Info (240droptop)

Re: RB Parts and Swap Info (silvia_ca18det)

Re: RB Parts and Swap Info (sean8564)

Re: RB Parts and Swap Info (sean8564)

Re: RB Parts and Swap Info (gte)

Re: RB Parts and Swap Info (Evo_bill)

Re: RB Parts and Swap Info (Booztd 3)

Re: RB Parts and Swap Info (WDRacing)

Re: RB Parts and Swap Info (Monkey87)

Re: RB Parts and Swap Info (WDRacing)

Re: RB Parts and Swap Info (yotik)

Re: RB Parts and Swap Info (WDRacing)

Re: RB Parts and Swap Info (WDRacing)

Re: RB Parts and Swap Info (WDRacing)

Re: RB Parts and Swap Info (WDRacing)

Re: RB Parts and Swap Info (Tofubadguy)

Re: READ HERE BEFORE POSTING, RB Swap & Parts Info

Re: READ HERE BEFORE POSTING, RB Swap & Parts Info

Re: READ HERE BEFORE POSTING, RB Swap & Parts Info

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums