rb26 with q45 mafs? pin out??

[SullivanRacing06]

so im planning on using dual q45 mafs on my 26 and would like to know the pin out for the stock r32 gtr mafs and the pin out for the q45 mafs.

the q45 maf has 3 wires while the the stock gtr mafs have 4 wires.

the q45 maf has a 5v input, the signal wire that has a signal going back to the ecu, and one ground wire.

the gtr mafs have 4 wires, a 5v, signal wire that goes back to the ecu, and 2 grounds?

im asking if any one could supply me with a diagram for both the q45 and gtr maf clips. so can i hook up both of the grounds from the harness to the gtr mafs to the single ground on the q45? thanks for any help!

carl h?

[gawdzilla]

you have the right idea... double up the ground since the Q only has one. this link shows the wiring of the Q45 maf. http://paulr33.skylinesaustral....html

for the 26 maf, just test your existing wires. the signal wire is pretty obvious because it is shielded.