RB26 L-Jetro Power FC and chase bays harness

[the_garynator]

I've got an L-Jetro Power FC, I'm going to be purchasing a chase bays harness but need to clarify something before I purchase it. Did some searching and haven't been able to find an answer.

What o2 sensor configs does it support? Reason I ask is that the stock dual o2 sensor config adds $30 to the cost and down the road I'll be upgrading to a big single instead of the stock twins. I'd rather just run a narrowband simulator or single o2 to keep things simple.

Also, does anyone know whether it natively supports high impedance or low impedance injectors?


Thanks,
Gary

[Yellow4g63]

RB26 uses a resistor box so it will do high impedance injectors no problem without the box. With the box in place you need low impedance injectors. I'm pretty sure you can disable the 02 sensors in the PFC.

[the_garynator]

Awesome, thanks man!

[chad b.]

ChaseBays harnesses are the biggest prices of garbage on the planet. I had one on my s14/rb25. After sending it back twice, I had to cut it open and trouble shoot it. The wiring was so screwed up on it, if I hadn't fixed it myself, my car would have never ran. Do yourself a favor and get a Wiring Specialties harness. Yury has been wiring Nissans for a very long time. He's very knowledgeable and easy to talk to. Chase's personal car was at a local shop not long ago. An s13 with a vq35 swap. This is a car that he built and wired. It caught on fire because of bad wiring. After that was fixed, it never ran because nothing was wired up right on it. He eventually came and got it.