sorry if this is in the wrong spot... im new here kinda unfamiliar with the layout.
Im selling my current setup to finance a different motor. Im selling my RB26 out of my Z. IM posting here because there is great interest in this swap for the 240sx. and from what it looks like you guys know whats involved with it.
what i have for saleComplete rb26 with stock turbos, trust FMIC, 680cc injectors and SDS ems. this setup dynoed 392RWHP at 14 PSI, and pushes my Z to a consistent 11.2 @ 126 MPH at the track. im not familiar with the requirment to install the motor in the car but from what i see here its not hard especially since i have the SDS allready setup and tuned. all you would have to do is get a transmission, mount it in the car, hook up electronics, and fuel lines, and make intercooler piping... yes the intercooler is included. Im asking 4500 plus shipping. email me or respond here if your interested. look here for pics.
rb26 for sale
-
Blackie9900
- Posts: 23
- Joined: Fri Mar 19, 2004 12:39 pm
It had 41000 kilometers on it. I have driven it no more then 2000 miles since i have had in the last 4 years in my 240Z.
the motor has a rear sump oil pan on it now that i will need for the new motor im installing.
Im in alaska
The motor is basically stock with 680CC injectors, and trust FMIC and 14 PSI, im running SDS engine management on the motor.. this is also included. if you dont know what sds is go to http://www.sdsefi.com and read up ;> I may be able to throw in a gready type r blowoff.
the motor is tuned and puts out 392rwhp and will run like this forever. it is a very mild tune and as long as you run premium gas you will have no problems.
what car are you planning on trying to do this swap with? a 240sx?
The transmission has been sold allready but i may have another one here in a couple weeks if you decide to purchase. it is route 6 cross mission and wont be cheap if your interested email me at [email protected]
the motor has a rear sump oil pan on it now that i will need for the new motor im installing.
Im in alaska
The motor is basically stock with 680CC injectors, and trust FMIC and 14 PSI, im running SDS engine management on the motor.. this is also included. if you dont know what sds is go to http://www.sdsefi.com and read up ;> I may be able to throw in a gready type r blowoff.
the motor is tuned and puts out 392rwhp and will run like this forever. it is a very mild tune and as long as you run premium gas you will have no problems.
what car are you planning on trying to do this swap with? a 240sx?
The transmission has been sold allready but i may have another one here in a couple weeks if you decide to purchase. it is route 6 cross mission and wont be cheap if your interested email me at [email protected]
-
Blackie9900
- Posts: 23
- Joined: Fri Mar 19, 2004 12:39 pm
-
OlyDriftSquad
- Posts: 106
- Joined: Thu Apr 15, 2004 7:47 pm
-
PROJECTRB240SX
- Posts: 3673
- Joined: Fri Jun 13, 2003 5:33 pm
- Car: 1972 DATSUN 240Z W/ SR20DET