rb25det wont start
rb25det wont start
well i put the greddy intake on this weekend and when i went to start the car, nothing. it turns over and it has fuel and it has spark. the car ran fine before i put the intake on. so if anyone that can help please do.
Re: rb25det wont start (sheldon)
Ok, now I checked the spark plugs today after i have been trying to start it, and they was dry no fuel on them at all , but i have fuel at the rail. so dont that mean that the injectors are not working? someone has to have a clue here.
Re: rb25det wont start (sheldon)
check to make sure all of the harness plugs are reconnected and that your grounds on the new manifold are tight. Have you upgraded to the Q45 TB. if so, check the wiring on the TPS and see if you are getting fuel pressure. Most likely you did something when you moved the fuel rail and unplugged the injectors.
Re: rb25det wont start (kermitman)
yes i did put the Q45 tb on the intake and my apexi avc-r shows it working fine . so im going to check the harness over again and see if i cant find anything. it really has to be somthing simple that im over looking .
Re: rb25det wont start (sheldon)
well iv'e been looking all over this thing and still nothing. the only thing iv'e found is that im not getting a pulse injectors . but you can give it a shot of stating fluid and it will fire right up. so i need some help here..
-
spoolin_s14
- Posts: 26
- Joined: Tue Dec 19, 2006 5:33 pm
- Car: 95s14
- Contact:
Re: (gawdzilla)
check the fuses under the hood had a similar problem with a srcheck the egi fuse i think
Re: (gawdzilla)
yes the fuel hoses connected the right way .
Re: (spoolin_s14)
well i checked the 7.5 egi fuse . its good
Re: (sheldon)
someone has to have a good idea what to check