rb25det series 2 s14

[bobob729]

to get this thing running from what i've read all i have to do is repin the m63 or f3 connector right or am i missing something?any help would be great thanks matt

[Joe]

for electrical stuff? yes thats all thats required for a series 2 if memory serves.

[bobob729]

for electrical stuff? yes thats all thats required for a series 2 if memory serves.

no front part of the harness like the s13? it's just the f3 plug that needs repined? we got that done but idk if it'll start yet just wanting to make sure before i put everything on and battery and stuff finally got the motor in took like an hour just to get it in the mounts lol but thank god it's in hopefullly i don't have to pull it out again

[FinkenS14]

All you should need to do is repin the harness.

Let us know how it goes.

[bobob729]

All you should need to do is repin the harness.

Let us know how it goes.

what about the lower harness i'm going from a auto to a manual?

also any suggestions on first startup
Modified by bobob729 at 12:21 AM 12/8/2009

[S14-NEO]

prob could do it with the lower auto harness but it will definately be easier to do with a 5spd harness already...just a thought

[bobob729]

prob could do it with the lower auto harness but it will definately be easier to do with a 5spd harness already...just a thought

ok i still need to know how to do the lower harness

[S14-NEO]

if you have the s speed lower harness from an S14 then its pretty much a plug and play deal...which ever sensors dont plug directly into the transmission just swap them from a stock transmission. for the most part all you will need is a speedo sensor and the reverse sensor .

[bobob729]

it runs finally now to wire the neutral switch and speed sensor and reverse lights driveshaft and q45 diff yaya!!!!!