RB25DET rich idle

Discuss the RB20, RB25 and RB26 series engines.
doriftosil13
Posts: 2
Joined: Mon Sep 11, 2006 9:31 am
Car: s13 RB25DET

Post

Hey guys im new to the board and i had a question for you guys. I just got a RB25DET and put it in and followed the diagram to wire it into a S13. ok when the car is cold and i start it then it will idle fine but once it gets warmer the engine will sound like its missing really bad and it will die and will not idle anymore. even with that problem when the car is warm i could open the throttle up and it will rev but sound like its missing revving up. I was thinking it could be the MAF or maybe a coolant temp sensor. any thought on what this could be? I checked my wiring like 10 times and its all good so i was thinking it was a sensor of some sort. any help would be appreciated.


User avatar
Kansei240sx
Posts: 1356
Joined: Mon Nov 01, 2004 10:17 am
Car: S13 - RB25 Circuit car
71 240z - street/track day car
AE86 - Daily Drizzle/track day car
Z31t - Paper weight/street car
Contact:

Post

Vacuum leak more than likely. Check your AICV as well.

doriftosil13
Posts: 2
Joined: Mon Sep 11, 2006 9:31 am
Car: s13 RB25DET

Post

well i have no vacuum leaks and the weird thing is that when i run the car with the MAF disconnected it runs fine for the most part. it wont idle either way but revving it with it off is alot smoother and doesnt seem to miss giving it wont revvpast 4k rpm but then i plug it in and it revs high again and misses the whole time.


Return to “RB20DET / RB25DET / RB26DETT Forum”