rb25det oil cooler que.

[jrb92se]

ive been having cooling issues as you may know from previous posts. im going to be installing an oil cooler and was wondering if i should use one of those adapters that sandwich between the filter and block or if there is another way to hook it up. also where can i get one of those plates for an rb25det arent the filters the same as one of the 300z's i believe i read that on nico somewhere but am not positive anyway thanks for your help guys

[krayton]

use the plate.

iirc 3/4-16 in. Thread

look on summit. i priced my oil relocation and cooler setup including the AN lines for around 350

[Joe]

ill verify

3/4 -16 thread.

[jrb92se]

sweet thanks guys i got the cooler im gonna get the plate and hook it up during the week

[Joe]

take pictures!

[jrb92se]

ill post pics of the whole set up when im done i made a sweet panel for under the intercooler. i need to hook up the o/c kit ,wire in a relay and switch for the third fan right now its just got a pig tail i have to open the hood and unplug it (ghetto) and im going to change the coolant again just to be safe i think its got to much water in it right now. but all in all it ran pretty cold for the most part today

[jrb92se]

here is a pic of the cooler for now ill post more when i take em

[jrb92se]

Modified by jb96s14 at 12:13 AM 8/2/2006

[Joe]

ill even bump this for you

[krayton]

PRM-1070 Remote Oil Thermostat, Aluminum, Dual 1/2 in. NPT Female Inlets, Dual 1/2 in. NPT Female Outlets, Each $39.88 $39.88 RUS-610040 Fitting, Hose End, Full Flow, Straight, -10 AN Hose to Female -10 AN, Aluminum, Red/Blue, Each $9.95 $29.85 RUS-610180 Fitting, Hose End, Full Flow, 90 Degree, -10 AN Hose to Female -10 AN, Aluminum, Red/Blue, Each $19.88 $59.64 RUS-632180 Hose, Proflex, Braided Stainless Steel, -10 AN, 15 ft. Length, Each $91.95 $91.95 RUS-660500 Fitting, Straight, -10 AN Male to 1/2 in. NPT Male, Aluminum, Blue, Each $3.95 $39.50 TRD-1013 Adapter, Oil Filter Bypass, Spin-On, Aluminum, Natural, 3/4-16 in. Thread, 1/2 in. NPT Inlet/Outlet, Each $9.88 $9.88 TRD-1028 Oil Filter Mount, Single Filter, 1/2 in. NPT Inlet/Outlet, 3/4 in.-16 Thread Filter, Each $12.75 $12.75

i just copied my summitracing cart. i dont know how it did the pasting.

there ya go....

edit: oh, the first price is how much it is for one, then the 2nd price is the total since i ordered more then one on some

[jrb92se]

sweet thank you

[D_spec]

i work at summit, i got the sandwich plate, lines, fittings, cooler out the door for $80. YEEEee

[jrb92se]

just checked out the summit catalog ill be ordering the stuff on the weekend after i get paid thanks guys

[l0nestar]

What cooler core did you go with? (part \ size dims) How did this work out for you?

[Bluefire]

Go for a Setrab Cooler!!!

[l0nestar]

What is this 'Setrab' of which you speak?

[l0nestar]

darn reposts...

[Darius]

Setrab is a brand name oil cooler

http://www.bakerprecision.com/setrab.htm