RB25det neo CAS issue!!! Removed and won't start after put back in

ONLY for ADVANCED technical discussion about the 240sx!
Post Reply
Boosted30
Posts: 1
Joined: Sun Feb 07, 2016 2:41 pm
Car: E30 m20 hx35
95 240sx rb25det neo

Post

Please help, removed my CAS and spun it to see if injectors were clicking. Put it back in and now my 240 will not start. Before it only started and died but would stay running while revving it. So I was checking if all injectors were clicking. Think timing is really jacked up now

Top
User avatar
themadscientist
Posts: 26254
Joined: Tue Nov 12, 2002 3:30 pm
Car: R32 GTR, DR30 RS Turbo, BRZ, Lunchbox, NSR50 Sportster 883 Iron
Location: Staring down at you with disdain from the spooky mountaintop castle.

Post

Get a timing light on it and check. Also, make sure you properly lined up the keyway in the shaft of the CAS to the hemisphere tab on the end of the exhaust cam.
Top
Post Reply

Return to “240SX Technical Forum”

Search for Nissan stuff on ebay!
Find Your Forum!

 

NICOclub's Nissan forums and Infiniti forums and all affiliated sites are the property of HDS Holdings, Inc.
They are independent publications and are not affiliated with or endorsed by Nissan or Infiniti.

Information Copyright © 2000-2026 by NICOclub, all rights reserved. Material may not be copied or reprinted without written permission.

Privacy Policy