RB25DET Lifting Points

[Darius]

I am looking to pull the RB out of the clip this week and need to know what the bolt diameter and thread pitch are for the holes in the head near the firewall on the LH side of the motor. (where the sling bracket is supposed to bolt up) I'm assuming it is the same as the front sling but I can't get at the front sling bracket bolts as the fuel rail is in the way. I'm assuming they are 12mm, but can't be sure.

[240sxed]

good places are the 2 bolts on either side whre the transmission bracket mounts to the engine for bracing. Also in the front, you can hook it on an engine mount bolt, its a lot harder to hook an rb b/c of the intake manifolds design, and b/c of the exhaust manifolds short design.