RB25DET ECU STICKER

[Kansei240sx]

As the title suggests. I have this sticker over my ECU where you check for codes, thats never been removed... My question is, have any of you ran across this sticker or what it means?

I just assume the motor was never ran for codes or what not. I know its simple to just go pull the sticker and go run codes like a normal ECU, i was just curious if anyone has run across this.

::photo edited in paint, red outline does not exist IRL::


Modified by Kansei240sx at 6:45 PM 7/3/2006

[Kansei240sx]

OK, so i just went to go run codes.... Now remind you the last time i did this code stuff was with my KA ecu, and then before that, my friends VG30ET ECU... Now.. to my recollection, you do it the old fashioned way, screw driver clw, and then screw driver ccl. And while the key is in ACC you run codes, and the little tiny light flashes. Well... uh. yeah, my ECU doesnt have little light in it period. i though it just couldnt see it, so i took the cover off, and its not there period. So... my conclusion leads to... oh boy i need a consult port to read wtf the codes are, but 91 s13's dont have Consult ports to what i've been told and seen removing all the **** under the dash..

am i wrong? Someone help me out here, i need my car running by tommaro decently, im just going through the entire car and fixing all the minute details.

[Yellow4g63]

Did you try to turn the screw while the light was on the dash?

[Kansei240sx]

No light ever came on.

[TheOne]

you are supposed to put the key on acc, turn the screw all the way, wait 10 secs then all the way back, and either dash light should come on or the light in the ecu.

unless otherwise your cel light in the dash doesn't work or isn't hooked up, and the light in the ecu isn't there, then you probably need the consult.(91's have it, don't know if its connected to your ecu though)

[Kansei240sx]

ok, thanks man.