RB25DET choosing injectors-

[jlaudio_21]

As title states looking to purchase injectors for my rb25det and deciding on my choice of brand. It is mostly stock with KU Intake mani with 90mm TB, vibrant fmic, walbro pump, z32 fuel filter, Safc II and purchasing nismo fpr. Running off a turbo xs boost controller I plan to raise boost to 10-12 and thinking of either 550 or a little higher injectors. Brands RC, JECS, Deatschwerks, or Siemens Deka. Please fill me in with some ideas for my purchase if possible.
Thanks,
-Brian C.
Leaning more towards top feed 650 Siemens Deka. Good choice?

[jlaudio_21]

Siemens Deka 650cc top feed

Injector specs:

Static Flow Rate: 60lb/hr = 650 cc/min
Dynamic Flow Rate : 18.6 mg/pulse 2.5ms PW, 20 ms Period
Coil Resistance: 12 Ohms (This high-impedance injector will work with all factory ECM/PCM injector drivers)
Series: DEKA 4 ( DEKA IV )
O-Ring Type: Viton

[240z4u]

IMO, you don't need injectors. Stock should be fine. What are you going to control them with.

I have had Venom (garbage), Deatchwerks (spelled wrong, I know) which I really liked, and I have gigantic bosch top feeds now.

Evan