rb25det cams!

[boostin180sx]

So my motor is supposed to comeback from the machine shop this week and I was thinking about getting some cams. Im thinking pon cams, but finding a good price on these is difficult. Also ordering from nengun takes a month of sundays. Whats the best place in the US to get the pon cams for a reasonable price? Thanks in advance for all responses.Brandon

[StricNyne]

ravspeconline.com has a deal on pn cams and cam gear

[minivan_don]

if you hold off a bit ... ill be posting my results from the custom grind thats being done at http://www.coltcams.com the cams itself should be done any day now, but unfortunatly my motor is not

i will be arranging a group buy on them and they should be priced very affordably not to mention being a direct drop in

[StricNyne]

let me knwo about that asap minivan cuz all i didnt do in build was cams

[sleepin240]

sweet sounds good i can wait

[Chaos the Xile]

if you hold off a bit ... ill be posting my results from the custom grind thats being done at http://www.coltcams.com the cams itself should be done any day now, but unfortunatly my motor is not

i will be arranging a group buy on them and they should be priced very affordably not to mention being a direct drop in

What Spec are you taking you stock cams up to?Could you let us know a price too?

[minivan_don]

specs will be within the tolerance of the stock hydrolic lifters to allow it to be a drop in. i havent talked to the shop since last week and Geoff was still working on the grind specs... ill be talking to him this week. i gave him info on the current cams out there for the rb25 to allow him to get a better idea of whats out there as well as what id want out of them.

BTW - Geoff makes ALL the cams sold at http://www.pdm-racing.com if anyone was wondering how Colt Cams cams perform. my buddy has the stage 2 ka cams and they seriously rock!! basically i want the stage 2 results for the rb25.

price - it will vary depending on how many people sign up but they will definatly be cheaper than jdm cams.

[midnightsliding]

if price is with in reson and put down good numbers im in.(25)

[Chaos the Xile]

yeah me too specially if they are as good or better than HKS or Tomei, cause Tomei was going to be my choice, but minivan might be on to something...

[minivan_don]

be patient ... its not like anyone of us NEEDS cams tomorrow

i talked to Geoff and he wants to finish up the cams in the next 2 weeks or less. realistically i should be testing the regrinds out for early june. ill be making a thread so it wont go unnoticed

[Chaos the Xile]

sounds good thanx man!

[meet07]

Im curious about these regrinds!!!

[minivan_don]

oh yea ... well their in and working great. smoothed out some of the midrange and still pulls hard up top.

sorry i havent posted more but ive been uber busy at work. i probably wont post anything til sept sometime when i can take the time to post things properly.

[rbosacco]

don, ever get the specs?

[minivan_don]

primary intake - 268secondary intake - 260exhaust - 264

is adds about 1mm of lift to the valves.

[Chaos the Xile]

i know your busy but if you get time could you let us know on the pricing on the regrinds? and I'm sure we'd all love to see dyno results?

[minivan_don]

yea ive got some dyno results from my setup ... and an idea of what the regrinds will run ... but im not sure if im allowed to arrange a group buy on the forums. Colt Cams wants to do runs of a min 5 as thats kinda how they roll ...

i can say that the cams are smooth - not lumpy and is more responsive down low

[HPFBranden]

Let me know the pricing too. I'm about to tear into the head of my 25 and it wouldn't hurt to run some bigger cams. Do you have a ball park figure if we got 5?...10? I got another guy here at HPF that might want some cams for his 25 also.

[rbosacco]

hey don also when you get back to us on pricing what can you tell us about what valve springs your using and how high you are revving your car and such? thanks

[minivan_don]

i think we'd be hard pressed to get more than 2 runs of grinds ... 5 or 6 ppl is the min to ensure that you guys get the best pricing

my setup??rb25 head - 3 angle valve job, new valve seals, minor porting (basically removing some flashing and evening out the ports), and tomei valve springs.

im reving up to 7700 i believe (rev cut) but my dyno results showed that my power never really dropped off and i could continue to keep revving

[Chaos the Xile]

see if NICO will allow a broup buy run it by AZ Hitman or one of the admins I'm down!

[Shocker]

Mini Van Don if you could email me at [email protected] I would appreciate it. I have a few questions for you. thanks.

[nizmo zilvia]

Count me in! Give me a price for a RB20 and I'll be down. I'll be tearing my RB apart this winter to give it more power and these will come in handy!! Thanks man.

[minivan_don]

Count me in! Give me a price for a RB20 and I'll be down. I'll be tearing my RB apart this winter to give it more power and these will come in handy!! Thanks man.

this is ONLY for the rb25 at the moment ... but correct me if im wrong here but cant you use stock rb26 cams as an upgrade?

[StricNyne]

price lol how about for a neo ?

[nizmo zilvia]

this is ONLY for the rb25 at the moment ... but correct me if im wrong here but cant you use stock rb26 cams as an upgrade?

Yes, as far as I know they are direct drop in. Why you have some thing for them??

[minivan_don]

no

[minivan_don]

price lol how about for a neo ?

again ... pricing and eta on these rb25 s1/s2 cams will be set later in its own thread.

as for the neo, nothing sorry.

[minivan_don]

ive got pricing, shipping info, expected turn around time, ect ect...

im just waiting to hear back from [email protected] if its ok for me to post this group buy....

[Shocker]

ive got pricing, shipping info, expected turn around time, ect ect...

im just waiting to hear back from [email protected] if its ok for me to post this group buy....

not sure what I would have to do with it. I'm not a Mod, run it by Kamin or Carl, im sure it will be cool with them.