RB25 wiring question??

[S13PowerByRB25]

As the title says i am doing a rb25 s2 swap into s13 and i am having a little difficutly understanding couple of plugs. i have searched everywhere but i can't seem to find any information and i don't know what this plugs are for, so if anyone knows what they are for could tell me what to do with them would be great.

here is the first plug

this is the second plug

this is the third plug

and one more thing i have cut the wiper motor and amplifier wires and everything needed to be cut from big white plug and i was woundering do have to keep the rest of the wiries or should i cut everything off from this plug

thanx

[S13PowerByRB25]

Bump !!

anyone, more then 25 people have viewed this and no body has the answer for me. please help me i really need this or maybe someone could give me some pinout or wiring layout so i can trace back and see what those plugs are

i know there are lots of expert in this froum so please help

thanx

[S13PowerByRB25]

bump

anyone comon people help me out.

[tek747]

and one more thing i have cut the wiper motor and amplifier wires and everything needed to be cut from big white plug and i was woundering do have to keep the rest of the wiries or should i cut everything off from this plug

[/QUOTE]Why would you want to cut the wiper motor and amp wires?!? secondly that big white, thin plug is your M63.... as for your other plugs.... i dont know

[DRIFTING.com]

RB25DET HARNESS WIRING DVD (S13 CHASSIS ONLY)http://store.driftingshop.com/rbhawidvd.html

[S13PowerByRB25]

[/QUOTE]Why would you want to cut the wiper motor and amp wires?!? secondly that big white, thin plug is your M63.... as for your other plugs.... i dont know

i cut the wire cuze the wiper motor and the amp wires are on the s13 main chassis harness. so i dont need this one from rb25.

[S13PowerByRB25]

bump

anyone wants to help ?????

[Darius]

Yes you cut off the RB M63 plug and connect the cut wires to the appropriate locations on the S13 harness. I don't think the S13 has a compatible M63 plug like the S14 does. Someone correct me if I'm wrong on that.

[S13PowerByRB25]

wow nobody knew how to freakin wire the rb25 and this is the forum that is dedicated to rb engines, thank you all for their help. However, little bet of thinking and frustration and i finally found the solution and i am finish with my wiring. if you guy want to hear the beast waking up watch the video http://www.youtube.com/watch?v=ytsMNfxKQyU

[StricNyne]

i woulda bought the dvd wiring is on my bad side now, ne way since no one knew why dont you post up what u did (btw i am not being a smart *** heh)

[S13PowerByRB25]

i don't get it you bought the dvd or not.

and if you bought it you don't need to read this because as far as i know they covered the whole thing on the dvd so i dont think you would have any dificulty.
Modified by S13PowerByRB25 at 12:20 PM 9/18/2008

[StricNyne]

i dont have dvd, and i wa ssaying u should post what u did

[S13PowerByRB25]

if you need somthing let me know what you want and ill help you out. it is not a big secret bro. what do you want to know. tell me and i'll let you know.

[StricNyne]

heh i dont need to know anything, just if someone runs in to the same issue u had and u post how u fixxed yer helping someone else, my wiring pisse dme off since i couldnt find r32 gtr to s14 wiringso i paid carlh to do it

[S13PowerByRB25]

I’ll probable do a write on how to wire rb25 for s13 if I have time I’ll do this for next week or so for people to use, because the information on the net is all over the place and it is freaking headache to find all of information. School and the project is taking lots of my time ill see what I can do

[jdm_rb25det]

for the coilover

cusco 850$ shipped
jic 850$ shipped
tein super street almost new : 999$ shipped

i couldnt send you pm its not active ur pm