RB25 Turbo on KA24E

[240RB1]

does anybody have this turbo strapped to their kae. if yes how does it run is it to big/small does it have alot of lag what manifold did u use. i bought a t3 rb turbo in great conditions for 200 and was wondering if anyone else has gone this route.

[Florida240sx]

It work good.

[240RB1]

What do you mean. could you race and beat an iroc-z camaro and a z28 ith ease i plan to use a frontmount 8:1 FMU and a homemade manifold and stock injectors fro now

[480sx]

Stock injectors is a bad idea. Anything over 5-6 psi of boost and your in serious danger of blowing your engine. Spend 100-150 on ess arr 370's, 50 bucks on a n60 MAF and work with that.

The t3 flanged t25(i think?) from a rb is fine for a cheap setup.

You should save enough money untill you have enough to do it all right. A stock 240 beats a blown up turbocharged 240 any day.

[240RB1]

i have a ka24e so the injectors are top feed not side feed like ess arrs. isnt a n60 maf from a 300zx. those are a rare find around here. even if i do buy injectors and maf wouldnt i need to spend even more money on a safc or something of that sor to tune it?

[480sx]

The n60 is from a few dif cars, the q45 for one. Do some research on the other cars it came off of.

The n60 maf and 370 cc's balance eachother out. I have not tested this myself, but im sure someone else has. Im going on what knowledge i have picked up from this forum. But since you have a sohc your kinda screwed.. Im not sure where you would find cheap 370cc topfeeds. Check the injector spread sheet on the FAQ sticky.
Modified by 480sx at 8:58 PM 12/16/2007