Post by
BigPar »
https://forums.nicoclub.com/bigpar-u30547.html
Sat Nov 25, 2006 7:07 am
So apon playing with my RB25 Series2 TPS trying to set it, I've come to the conclusion i'm not exactly sure what I'm doing. I've searched and read many articles, but still confused on what exactly I should be looking for.
So I've got key in power on and I'm taking a volt meter to the brown/bottom plug on the TPS. I've got the negative to the black blue wire (far left pin if looking at connecter with push clip on top) and positive to far right pin yellow/black wire. I'm getting a reading of about 6.5 volts. Do I have my hook ups right? And I'm suppose to get 5 volts correct?
Also I've loosened the two screws and can freely turn the TPS. I read somewhere I was suppose to listen for a click or something. Haven't heard a click. Moved it back and forth with the car started and it idled up and down a little, but nothing major. I just turned the sensor far counterclockwise as possible and screwed it back down.
I feel really clueless as to what I'm doing. So if anyone wants to lend a hand and let me how retarded I am right now, feel free, it will be much appreciated.