rb25 space in a 240sx

[like_em_sidewayzz]

hay i was just wondering how much space do people have between the radiator and the rb25det in a 89 to 93 240sx. can anyone please take a picture of the top view of your rb25 in a 240sx. and how do you guys keep you rb25 cool in a 240sx ?? do you keep the clutch fan or electrical fans ?? thanks

[Carl H]

there are several very good topics on this question already, try searching for the terms cooling, fans, radiator setups.

[like_em_sidewayzz]

no i am just wondering what setup everyone is running. and how much space do people have between the rad and the engine.

[Joe]

yes im sure you are wondering that, but if you search you will see what everyone is running.

[wakotow]

do this, you'll have plenty

post5117060.html#p5117060

[ihckoy]

It will depend on your intercooler set up, i'm running my fans in front of the radiator due to limited space from the intercooler pipe.

[like_em_sidewayzz]

how will intercooler set up effect the space between the engine and the rad ??

[Joe]

because some people run the pipe between the radiator and engine.

personally i think thats the WORST place to put your cold pipe but what do i know.

[rb25det250sx]

you could always custom fab you up a rad mount and move it frontwards a few inches. worked for me. and there is even a write up on how someone did it. cant remember who though. looks good funtions even better.

[RB25nURface]

Pusher fans broooo. With a aluminum radiator, about 2 or 3 inches

[like_em_sidewayzz]

can any one tell me how much space they have between the crank pulley and the rad ?? or are you going to tell me to search agen.

[Sil240]

I'm gonna tell you to SEARCH again.

But I'll tell you I have no Idea but I don't have space for a puller fan.

It depends on your Rad, and your Engine mounts.
If you were to SEARCH you would see some really nice setups like CarlH's or rb25250sx.

[like_em_sidewayzz]

^^ wow some one on here actually tried to answer my question / not really. if people on this forum would actually help people and not tell every one to search in every thread, maybe this forum would be a bit better. and the people that actually swapped rb25 in a 240sx that posted here, the time it took you to tell me to search you could of just told me how much space you have between the pulley and the rad. ^^

[Joe]

every damn person that has replied has or have had at one point a rb swapped 240.

USE THE SEARCH BUTTON. nobody is going to spoon food you the simplest of information.