rb25 s1 harness on s2 motor (ignitor)

[TimTheTool]

i bought a s13 converted harness turns out the harness is for a s1 motor mines a s2. so the ignitor plug is different dose any one have a diagram or pinout of the ignition wires? so i can just change the clip out..

[Darius]

The S2 does not have an ignitor like the S1. Instead each coil has its own ignitor. You can eliminate the ignitor plugs on the S1 harness and splice wires together across where the ignitor would normally be in the harness. Just make sure you get the right wires to the right coils or the firing order will be incorrect.

[TimTheTool]

yea yea i know that im just asking if any one knows what wire goes where im just gona splice the s2 plug to the new harness. the s1 harness has 2 plugs instead of 1.

[Darius]

You'll have to look at the RB25 wiring diagram for that info.

http://wiki.r31skylineclub.com...m.gif