RB25 injectors
RB25 injectors
How big are the stock injectors on an RB25DET? how much power(and boost) will they be good up until? (stock turbo with upgraded fuel pump and intercooler).Ive done some research on the RB25, but i used to want to go SR, so now i have to get a bit more info.. how much customising is needed to fit this engine? is any cutting necessary and what would you need to relocate to fit it? *usually* how much extra does it cost to get an RB25DET installed (just the installation) over an SR20DET? how much more are RB25 front clips over SR20 front clips (in general) ...ive seen a lot of different places selling an RB25, but does anyone know a very reputable one? also is it more advisable to get a front clip rather then a complete engine alone?the SR20's turbo is good up til about 14psi (with intercooler, etc..), but whats the efficiency range on the stock RB25's ? i know its a lot of questions but i like to be well informed before doing anything. Thanks in advanceAlex
-
mattlord42
- Posts: 193
- Joined: Sat Nov 23, 2002 8:53 pm
- Car: 1991 240SX Coupe
- Contact:
well everything i asked was based on research i did.. ive found about 5 different places that lists different info about the injectors.. ive found tons of places that sell RB clip, and tons of people who say that place is reputable, then others who say nothing but bad things... ive found info which says the RB's turbo efficiency range was 10psi, and other places that 16,18, etc..ive seen places that say the internals are good for 300whp, others that say 400 + .. and theres tons of places to buy different clips for different amounts of $$ , which is why im wondering for a reputable company, whats usually the difference in $.. dont want to help me, i dont care, but dont say i didnt searchAlexp.s dreams: way to post whore.. keep it up budmattlord42 wrote:I know i'm new here but i'll say it anyway:
SEARCH!.
I did and found out the answer to pretty much every question that you asked.
-Matt
-
themadscientist
- Posts: 26254
- Joined: Tue Nov 12, 2002 3:30 pm
- Car: R32 GTR, DR30 RS Turbo, BRZ, Lunchbox, NSR50 Sportster 883 Iron
- Location: Staring down at you with disdain from the spooky mountaintop castle.
-
YamaOni
- Posts: 475
- Joined: Mon Dec 23, 2002 2:30 pm
- Car: Its ugly and green, Its a cefiro dori machine
TegGSR96 wrote:well everything i asked was based on research i did.. ive found about 5 different places that lists different info about the injectors.. ive found tons of places that sell RB clip, and tons of people who say that place is reputable, then others who say nothing but bad things... ive found info which says the RB's turbo efficiency range was 10psi, and other places that 16,18, etc..ive seen places that say the internals are good for 300whp, others that say 400 + .. and theres tons of places to buy different clips for different amounts of $$ , which is why im wondering for a reputable company, whats usually the difference in $.. dont want to help me, i dont care, but dont say i didnt searchAlexp.s dreams: way to post whore.. keep it up bud
Info on the swaphttp://www.nissaninfiniticlub....10778
-
dreamsOfSkylines
- Posts: 254
- Joined: Tue Dec 31, 2002 11:29 am