RB25 Exhaust

[skilledquality]

I was wondering what exhaust would be good for a rb25 swap into a s13 240. Thanks

[Vrtgrumpy]

Any 3 inch exhaust for a S13 would be fine. I am running the Apex'I N1 on mine.

Grumpy

[skilledquality]

would that work for an rb25 too

[Vrtgrumpy]

I am running a RB25 in my S13............ehhehehehehehe

here: http://briefcase.yahoo.com/rbparts2003

go to my RB S13 folder for pics.

Grumpy

[MoeStooge]

I run all custom exhaust setups....get nice 3" systems for way less than apexi or greddy retail for.

Night

they press bent? theres only 2 mandrel benders in this country (that i know of) that will bend 3" diameter piping. What muffler is that using?

[zexdrex]

they press bent? theres only 2 mandrel benders in this country (that i know of) that will bend 3" diameter piping. What muffler is that using?

What country do you live in????????? i now of 2 in my area and the one in PA can bend up to 4inch!

[sixxdeuce]

are you sure that they mandrel bend though? Mandrel bending is not common at all. you are very lucky if you live that close to shops that can mandrel bend

[Bryson]

I just bought a full 3" mandrel bent stain steel exhaust from a company called Megan Racing here in California. I haven't gotten it yet, once I do I can let you know how it turns out. I bought it off EBAY for 362 shipped

[Bryson]

Here is the link to that exhaust if you'd like to check it out. I already won this auction, but I'm sure if you look up 240sx exhaust you'd find another one.

http://cgi.ebay.com/ebaymotors...50303

[erich]

I just want to know where they got that spiffy stainless resonator. I would LOVE to knock out the 2500rpm drone on my exhaust.

[Bryson]

I got the above mentioned exhaust in today, and I took some pics... everything looks really good! There is however one very tiny... probably less than 1/16 or 2/16th of an in deep dent on the longer pipe... I think it got there during shipping. Anyone out there know if a dent that small will really influence me enough to bother sending it back and making a big deal out of it? I took some pics of everything & then dent I will post them later.

[dcdrifter]

It is really up to you. I would call them and ask for a new one. You paid for a nice brand new "dentfree" exhaust. What it boils do to is do you want to wait for a new one.

[mmerritt2]

do you know if they sell anymore? that is one very bad*** looking exhaust!

[Joe]

yea that guy always sells 240sx exhaust's

i know 2 people running them now, they sound awesome without the silencer

[mmerritt2]

do you know where to get them?

[Joe]

[email protected]read the auction, his email address was in there.

[mmerritt2]

my fault......thanks!

[mmerritt2]

Does it gain a good amount of horsepower and let your engine breathe well? It is a very nice exhaust...... I just want to make sure that it is good quality! Stainless Steel is very good right?!