RB25 Build and Turbo Upgrade

[Mute]

Ok boys and girls, so we had a great time doing our first DVD and it went really well, we have a solid motor installed beautifully inside of my S-13 Project car, well now I'm going to build an Rb25 for 500 HP and add all the bells and whistles to make our car truly track worthy.

Coming Soon, Drifting.com and Ali's Drift Garage present:

Part 2 in our ongoing Tech DVD series

The ULTIMATE RB25 Motor Build and Turbo Upgrade

Filming to Start Early September

We aren't going for massive amounts of power, just to hit our 500HP goal and then likely keep the car tuned in the range of 400-450 HP depending on what ends up being best. Our goal is to ultimately have a motor that can reach our goals dependably and consistently.

Current Sponsors who have signed on:

Speed O Motive (Head and Block Work)JE PISTONS (Forged Pistons, Pins, Rings)K1 Rods (Forged Rods)Apex-i (Electronics component installation and tuning)Torco Racing Oils (Sponsoring all oil for project car)KKR TURBOS (Turbo Sponsor)FERREA Racing Components (Full Valve train components)NGK USA (Plugs for project)SPEC Clutches (Double Plate Clutch/Flywheel Set)Phase2Motortrend (Misc parts sponsor)Hose Techniques (All applicable hoses for engine)

I'll be updating this as we still have more sponsors coming on board. Thanks to a lot of you for the support on our first project and I'm looking forward to another great project to come.

[Mute]

The Driveshaft shop has just come aboard our project and will be supplying axles capable of holding 450+ HP.

[Darius]

Are you going to be doing head modifications to the oil supply and/or return? What about the crank collar issue? Who will you be getting your bearings from? Are you getting ARP fasteners?

[Mute]

Darius,

Yeah man, the only thing on that list so far thats been taken care of is the ARP fasteners. I'm meeting with our own RB guru, Gary from Syko Performance to figure out what else we'll have to dial in on the motor to make this next DVD a worthwhile and comprehensive watch.