Rb25 + 100 shot of nos?

[Boostedkouki23]

I'm very interested in spraying my rb25 i saw 1 of the guys on here post a video i was very impressed with the outcome.. What i need help on is what spark plugs do you guys recommended also what can i set the gap too? What can i set my timing too? Thanks in advance.

[ANVIL]

im curious about nitrous setups on rbs also. i think ive only seen 1.

[meet07]

im not an expert but i would say 2-3 step colder plugs and base timing. but on the real, i would do a low shot with a wideband,tuning software and some sort of knock pickup device. i too want to throw some juice to the rb but not rite now.

[jdmser]

I ran a 75 shot on my rb20 with no problems. Timing was at 15*, plugs were ngk copper two heat ranges cooler, and it was a Zex wet kit. Definitely took care of any lacking the 20 has down low.

[nissandrftr88]

I'm running advance auto parts PN 1283, which are bkr7e11 i think gapped at 27....spraying 100 on rb25 with a z32 stock ecu no tune,very happy with results waiting on romulator to tune it.

[meet07]

would that 100 shot harm the stock turbo? i have never sprayed a turbo vehicle before, and was wondering does it bump the boost up? i assume so.

[Boostedkouki23]

I sent you a email dude im guessing the 300zx ecu has a be twin turbo ecu? Also what can i set timing too?

[nissandrftr88]

would that 100 shot harm the stock turbo? i have never sprayed a turbo vehicle before, and was wondering does it bump the boost up? i assume so.

unsure of turbo damage,i dont care about my turbo anyway.Going SC61

But i run 10lbs and it creeps to 13-14 in the upper RPMs on the spray...at 14 lbs it creeps to 16

[Cjmartz2k]

As long as you tune for the N2O, you'll be fine. Then again, you don't tune for it and you've got a lot more to worry about than your turbo going titts up

[Shanejenkins1]

unsure of turbo damage,i dont care about my turbo anyway.Going SC61

But i run 10lbs and it creeps to 13-14 in the upper RPMs on the spray...at 14 lbs it creeps to 16

What you run if you dont mind me asking? Your set up would be nice to know also.

Thanks.

[nissandrftr88]

What you run if you dont mind me asking? Your set up would be nice to know also.

Thanks.

low 11's.Its Stock motor with greddy intake manifold,q45 tb,hks intercooler,stock turbo,home depot boost controller,stock vlsd,wore out bfg DR's,full weight and pump gas

[Shanejenkins1]

I think I am going to put my bottle on today!

[meet07]

16lbs..?? i now when my turbo spiked to 16 one time it made a unhealthy whin.??

[Shanejenkins1]

Ehh, I will keep mine down to 10-12pounds. With a 75 wet shot, nx kit. I dont want to go past 14psi really. I hope to get a high 12sec in the quarter! It runs about a 13.8 on a good day as of right now.

[nissandrftr88]

Ehh, I will keep mine down to 10-12pounds. With a 75 wet shot, nx kit. I dont want to go past 14psi really. I hope to get a high 12sec in the quarter! It runs about a 13.8 on a good day as of right now.

Buy slicks (/end)

i ran 12.4 in my s13 with rb20 with a rb25 turbo with just slicks

[Shanejenkins1]

Buy slicks (/end)

i ran 12.4 in my s13 with rb20 with a rb25 turbo with just slicks

Ohh, please more detials!

Complete mods please. Maybe another video? I am really interested.



I also have slicks, I will put them on as well! lol

[nissandrftr88]

Ohh, please more detials!

Complete mods please. Maybe another video? I am really interested.



I also have slicks, I will put them on as well! lol

I dont have a video of the 12.4 but i do of the 12.6 that was ran about 10 mins after the 12.4...nobody had a camera yet for my 12.4.

1 min into the vid

http://video.google.com/videop...hl=en

Complete mod list:RB20DET,stock intake,hks filter,stock exhaust manifold,stock RB25 turbo @ 14lbs,uras exhaust,sparco FMIC(very crappy),spec stage 3,j30 diff,22X8x15 MT SLICKS, I think thats abou it...

[Shanejenkins1]

^ your my hero.

lol

[nissandrftr88]

HAHA,ok..

Just a tease of whats to come

[Shanejenkins1]

Holy ****, more please. lol Took me awhile to see what that was lol

adopt me!