Ok so I wont get too deep into the details, as a have a 10 page write-up of what ive been through with this. My one maine question for this...
RB20DET into infitiniti M30 (VG30DE)
Wiring Harness conversions for this swap. We have tried and, quite obviously, failed in this dept. I need a solution, or a point in the right direction for this. The following link has all the info you would need to help me with this, minus the wiring details until i post pics n catch up on this build. Thanks.
rb20det into an m30, back into this project tons of info...
-
Yellow4g63
- Posts: 3718
- Joined: Mon Jan 20, 2003 6:07 pm
- Car: 95 Nissan RB20 240SX RB20
91 Nissan NX2000 VE power
95 Nissan 240SX Stock - Contact:
Re: rb20det into an m30, back into this project tons of info
I think your best bet to figuring out the wiring would be to look at the rb20 to s13 wiring sticky. Take note of what plugs had to be modified, and what wires (based on wire colors and function) were needed to be spliced into the s13 harness. Then just match things up with where they would belong on the m30 harness. This will take a while but I say take your time and it shouldn't be too bad.
My RB25 was previously swapped into a m30 and it seemed like it not much was modified to get it to work. Either way, good luck
My RB25 was previously swapped into a m30 and it seemed like it not much was modified to get it to work. Either way, good luck