RB20 to S13 -No 12v+ @ ignitor chip ? No spark issue

[Over-Rev]

OK, Buddy of mine just finished his swap , IT's not getting any spark.No 12v @ the ignitor chip? Where does it recieve it Power from ?

I probed the 12v on the coil and nothin,Backed tracked to Ign Chip and No 12v there.

So My main Question is where does the Ign Chip get its power and how it Routed .

I swapped the relay's by the ECU and nothing.

Thanx Guys

[Sil240]

The 3 wire plug next to the 6 wire plug for the ignitor.The thick white wire is the power, the Black and Red is the Ground.

[WhatsADSM]

OK, Buddy of mine just finished his swap , IT's not getting any spark.No 12v @ the ignitor chip? Where does it recieve it Power from ?

I probed the 12v on the coil and nothin,Backed tracked to Ign Chip and No 12v there.

So My main Question is where does the Ign Chip get its power and how it Routed .

I swapped the relay's by the ECU and nothing.

Thanx Guys

The ignitor does not get 12V power, that is normal. The coils receive 12V from the connector that sil240 mentioned.

[Over-Rev]

Thank you guys, After reading I went over his work and couldnt find the pug. He some how? Plugged it into the O2/sensor. After fixing swapping it LOL it fired right up....Thank you thank you thank you

The ignitor does not get 12V power, that is normal. The coils receive 12V from the connector that sil240 mentioned.

[Sil240]

Cool now that you got it Running you have to ComeOut to the meet in September.

[Over-Rev]

Cool now that you got it Running you have to ComeOut to the meet in September.

Our Luck its Back east somewhere no where close to Ca. lol

Here is a pic of My S13 with a Series II RB25DET, You'll love this. I used to run a LS1 with a Jerico 4-spd. Neadless to say , RB's are more than whats Rumored to be by NON-RB owner's. The RB20 we just finished will be out this weekend @ a Local Event. Thanx again guys and Now that Im a member I'll be around

[Sil240]

NICE!!!!!

Yeah its in NC/TN- The Tail of the Dragon

For some reason I thought you were in NC.

Thats awesome though.Yeah stick around the forums, you'll learn alot.