rb20 s13 no spark

Discuss the RB20, RB25 and RB26 series engines.
User avatar
driftem91
Posts: 6
Joined: Tue Jan 29, 2008 4:09 pm
Car: 1991 nissan 240sx

Post

wiring was done by mckinny. green relays wont click unless i run a ground from the orange wire off the relays to the chassis. then it will click not by key but when you touch it to a ground. still dont start dont think you should have to ground the orange wire but i dont know. any ideas can help if this doesnt make sense im sorry im typing this on a wii lol
Modified by driftem91 at 12:00 PM 8/29/2008


Carryl
Posts: 126
Joined: Sat Oct 14, 2006 3:28 pm

Post

you might wanna give a few more details...

User avatar
driftem91
Posts: 6
Joined: Tue Jan 29, 2008 4:09 pm
Car: 1991 nissan 240sx

Post

ok my relays will not click everything turns on when i turn the key on dash lights fuel pump ect. but relays will not click. a friend of mine did the same swap he said he had to ground the orange wire to get them to click so i tryed that and when i touch it to a ground they click once but do not click if i turn the key on and off. im getting no power to the ignitor chip the the 2 prong plug by it i am. i have no clue where to go from here

MEclipseGSX2G
Posts: 22
Joined: Mon Apr 30, 2007 5:03 am

Post

check the wiring maybe

User avatar
driftem91
Posts: 6
Joined: Tue Jan 29, 2008 4:09 pm
Car: 1991 nissan 240sx

Post

im pretty sure the wiring is done right mckinny did it i just dont understand why they click when i ground out the orange wire

User avatar
Carl H
Posts: 5985
Joined: Mon Aug 04, 2003 4:09 am
Car: 1995 Nissan 240SX SE RB30DET

Post

your wiring is wrong regardless of if mckinney did it...you need to call them up and let them know whats up.


Return to “RB20DET / RB25DET / RB26DETT Forum”