RB20 mods list

[grenade180sx]

alright so im going to get a rb20 swap

current mods list and what im shooting for.. 260-300 RWHPRb20det

stock internals

444cc injectors

FMIC

T3/T4 .64 trim

Stainless steel exhaust mani

griffin/koyo radiator

full 3 inch back

255lph walbro

at 14 psi

so i ask what would u change add or remove

this will be a rom tune and seeing as i will be drifting the car i want a very responsive setup with minimal lag but power through the revs.

thanks for any help or flames!
Modified by grenade180sx at 11:31 PM 9/25/2007

[nizmo zilvia]

You should have no problem hitting that much if not more.

[Urnext]

I agree you should be able to pull that kinda power. Are you doing anything to the engine as far as gaskets I know your not running crazy boost or anything but I'd probably do a headgasket with arp's just for state of mind.

[grenade180sx]

gasket im thinking as long as compression is good i slowly jump up bosot and keep an eye on it, all the exhaust gaskets are going to be changed .

[DriftX]

260whp can be had on the stock turbo with bigger injectors, lots of boost and good tune.

[grenade180sx]

yeah so i have heard, but ceramic turbo chargers and i dont get along very well with prolonged high revving and a bee r bang here and there