rb20 injectors

[black240jl]

this is my next mod, where can i buy some that are decent priced that wil drip right in and all i have to do it plug the plug into them, no resistors and all that crap, direct replacements?, anyone know thanks

[Yellow4g63]

don't know about cheap but check rhdjapan.com sard has high impedance injectors

[NCPP]

We have some over here in NZ bud.

Shipping would be very cheap - Just a small delay.

Any little bits and pieces like that are very easy to get here. I have a Paypal account so safe for both of us to 'trade'

Best Regards,Jase

[black240jl]

how much woudl a set run, looking at 650cc or 680cc..

[black240jl]

would these just drop right in and plus in with no resisters/

http://www.rhdjapan.com/jdm-lo...13005

[Yellow4g63]

would these just drop right in and plus in with no resisters/

http://www.rhdjapan.com/jdm-lo...13005

Yes, you might have to change the clips for the injectors with the ones it comes with. How much hp are you shooting for?

[mott6904]

Rc engineering makes injectors for rbs. Here is the part number i was giving for my rb20 SH4-750D. They are 750cc injectors but if they have anything like SH4-XXXD they will work. The XXX represents the size. they told me these were plug and play with no modifications were needed. I havnt bought a set yet im waiting till i setup a dealer account.

[black240jl]

nice, im shooting for around the 350-375 whp range heres mods so far..

raw brokerage rb20 intake mani high cap. ( ordering friday) i lovex return hehetop mount garrett t3 t04e 60 trimz32 maf also fridayall stainless lines, full 3"turbo back exhuast apexi nq1 mufflergreddy emanage ultimatepro sport widebandfront mount intercoolerraw q45-stocktb adaptor, also friday hehe walbro 255 fpaem afprhks bovoil catch tanknkg plugsexedy stage 2 clutch currently hks intake, soon to be apexi power intake i lvoe the small airfiltersthen all i need to buy after friday is injectors.. so.. would 550cc work formy setup? eh nm the 550cc question ha 650s are the same price.ad i think thats mostly it

[Yellow4g63]

nice, im shooting for around the 350-375 whp range heres mods so far..

raw brokerage rb20 intake mani high cap. ( ordering friday) i lovex return hehetop mount garrett t3 t04e 60 trimz32 maf also fridayall stainless lines, full 3"turbo back exhuast apexi nq1 mufflergreddy emanage ultimatepro sport widebandfront mount intercoolerraw q45-stocktb adaptor, also friday hehe walbro 255 fpaem afprhks bovoil catch tanknkg plugsexedy stage 2 clutch currently hks intake, soon to be apexi power intake i lvoe the small airfiltersthen all i need to buy after friday is injectors.. so.. would 550cc work formy setup? eh nm the 550cc question ha 650s are the same price.ad i think thats mostly it

See if the RC's are cheaper and get the 650's or 750's.

[black240jl]

i dont know rcs wedsite, rhdjapan 650 high load, 116 a piece shipped,not to to bad..

[mott6904]

rceng.com 98.75 for 550 to 750s price doesnt change. Plus they are out of cali and have awesome support.

[zismo02]

I have a set of injectors for sale if your interested.

zer...-ka24

No pics right now, but I'll put them up when I get home.

Check out Deathworks.I've heard alot of SR guys are running those.

[db_s13]

DeatschWerks... im going to run their 650's when i which to E85... check their site out and the underground motorsports rb26 have their 1600's, COBB time attack STI runs their injectors and they are a site sponsor i believe

[Carl H]

lol, have fun with the emanage...

[Carryl]

i run DeatschWerks 740cc injectors on my rb20.. no complaints...used supra isolators (recommended by Carl) for a better seal. No complaints though, completely drop in affair.

[black240jl]

i searched on rcs site and couldnt find that part number, someone give me the link to the rc 650 injectors that are a direct replacment.