rb20 in s14 wiring help

[jdmser]

I cut a lot of the wires going to this plug. It seemed like they were going to the KA harness but now that I see the plug goes along the inside of the passenger door I think I may have goofed. Can anybody help me out.

http://nissaninfiniticlub.net/...age=1

[Yellow4g63]

Hit up Carl H.

[Carl H]

uh oh, how badly is your ka harness mangled?i would reconnect that harness as the only harness that needs to be cut up is the ka harness, i have the remnants of mine in a box along with the ka ecu.got some pics, or better yet catch me on aim at psykodragoon.
Modified by Carl H at 4:53 AM 7/8/2005

[jdmser]

I was following wulfgangs wiring writeup and after I made all the spices I cut all the wires going from the ka harness and the ka ecu plug going to the f3 plug. There is still enough wire left on the f3 if I need to hook things back up though.

[jdmser]

I traced some of the cut wires today and I think its not so bad. Its seems like most of the stuff goes to the EVAP system. Some of the other wires go to the fuel tank temp sensor. I dont need either of these, do I?