RB Torque

[LeD ippen]

Just a simple question. Let not talk about the turbo and high hp numbers but how do i get more torque. meaning i do not care what hp number is at with what turbo but i care about torque . Should i get Cams to get more torque or do i need to custom how the exhaust is gonna be routed, or do i need to up the compression or what?

[Sil240]

Rb30
Where do you want the torque increase?
What are you doing with the car
LS1= TORQUE

[Joe]

torque = displacement.

you can increase torque and horsepower with all mods but TRUE torque can only be obtained by increasing displacement.

[LeD ippen]

I'm looking for all around torque through out the band without increasing the displacement basically something like low end that use fr drifting but i want it higher up too

[Joe]

bigger engine.

[flatrate]

using a longer runnered intake manifold might help... playing with camshaft timing can help put it in different areas... having a FAST spooling turbo will also help with torque

[robbie2883]

torque = displacement.

you can increase torque and horsepower with all mods but TRUE torque can only be obtained by increasing displacement.

actually in terms of basic engine physics torque is more a result of stroke, not displacement. longer stroke, more torque, lower red line (due to stresses and piston speeds) less stroke, less torque, higher red line.

[LeD ippen]

using a longer runnered intake manifold might help... playing with camshaft timing can help put it in different areas... having a FAST spooling turbo will also help with torque

This was the kind of information I was looking for thank you. Sorry for those who did not understand what meant in my first post.

[RustspecS13]

Are you getting an rb20? If so just get a rb25. If your getting a rb25, get a rb30 block, get your swap running and then build the rb30.

Or you can supercharge it.

~Alex

[2j'd]

torque=2jz

[cody180sx]

u can swap out the gears too that makes a difference, mine puts down more torque than hp with 4.46 gears