RB (26) Turbo Water return alternative

[StricNyne]

just looking at a few things for my water return setup and i found this

http://www.gtfactory.jp/cms/e1...at=11

any input ? any forseen problems or does it look like i am riding the gravey train ? i am the idiot doing the twins on the rb25 and the ton of problems, sucks as i am missing an assload of fittings well since i didnt own a 26 from the get go i dont feel as bad i would think just route that thingy to the water neck, thats like 10x easier than running the water to the heater core, and i still dont know how i am gunna get water to the IAC sigh
Modified by StricNyne at 4:05 PM 4/4/2008

[Coolwhip]

you mean a swirl pot? You can pick those up for cheap here, Greddy, SARD, Home Depot all have their own versions.

Are you going with some nifty SS lines? what happened to your factory locations and running a T from there? If not weld on AN bungs are nice

[StricNyne]

yeah, i am actually gunna make a well ask to make sticky with all AN sizes, and lengths, for stainless lines on the rb25 and the rb26 i learned a lot during this ordeal heh

[StricNyne]

i need a water return though !!! lol

[StricNyne]

bumpage

[Bluefire]

you mean a swirl pot? You can pick those up for cheap here, Greddy, SARD, Home Depot all have their own versions.

Are you going with some nifty SS lines? what happened to your factory locations and running a T from there? If not weld on AN bungs are nice

Thats a breather tank, not a swirl pot. And i've rarely seen anyone sell premade swirl pots.

Hey stricNyne can you post up some pictures of the motor and all the connections your looking for?