R32 rb26dett GTR into 1998 240sx S14 Wiring nightmare

[akathegod]

I need a wiring guide to finish this swap.I would pay to get it done but this swap has broke my piggy bank for a while now.If someone has a link or info on this please help me,my email is [email protected] Thanks,Jay

[Joe]

welcome to nico

there is no wiring guide but all the diagrams and such are available. i suggest you get cracking! its not too hard but its by no means easy

[akathegod]

Do I compare the diagrams and see what wire does what and wire it up that way?Im searching now.I was quoted 500 to have the harness done,and then 400 from somebody else.Appreciate it Kamin,Jay

[Joe]

most of the wiring takes place under the dash at where the dash harness meets the main engine harness. just compare the 2 diagrams and make things meet each other. there are a couple other small things in the engine bay but 99% of it happens under the dash.

[Chaos the Xile]

wiring is 100% a ***** if you have little or no experience wiring up a harness for a car. If you happen to start saving a little you could get Jon Powell to do it for you or Mikinney Motorsports. Personally I suggest getting it done professionally, just so you don't mess it up beyond repair...

[gawdzilla]

if you do it yourself, you'll know why it breaks when it does