R32 RB25 Wiring ?!

[BigC_1988]

OK,I have a R32 and I swapped the RB20DE for RB25DET S2 . Now for the harness. I asked around and they said I should use the diagrams and pinouts, but that didin't help. I've never done this before so I wouldn't know where to start. If there is someone out the tht could point me in the right directionit would really help out alot.

[sean8564]

I did the swap on one of my cars i had a 4 door Grey R32 with a rb20e and put a series 2 rb25det in it. I have not seen the car in 2 years but i will have to look up my note book where i wrote everything down in on the swap

[BigC_1988]

OK,tnx. I just finished labeling the wires on the incabin plug of the rb25det s2 harness. Now I still need the pinouts (or just a writeup for the wires) for the incabin plugs to the rb20de harness...Hope you can help.

[sean8564]

Let me call the guy i sold the thing to and see what the wire colors are on the pin outs. i just moved and most of that stuff is packed away but let me check mine was a SOHC RB20 to S2 RB25DET