R32 hubs swap

[crxcess]

has anyone tried to swap these onto a 240? None of my clips came with them...so im about to buy some and try....fronts.

[mmatl16]

this doesnt help at allbut i got r32 rear axles on my s13

[crxcess]

haha, your right...but thanks anyway.

[Slo_240sx]

Where are you getting r32 hubs from? Why are you getting them just for 5 lugs? If that the case you can use Z32 300zx hubs. You'll need matching rotors or redrill your old ones. If you get the hubs you might as well get 300zx brakes. and if you do the brakes might as well get the z32 front spindles.-Alex

[crxcess]

again thanks for the info but im looking to see if anyone knows if the r32 front hubs fit s13's

[crxcess]

ok well I bought them so I will let everyone know if they do fit or not.

[Imissmyturbo]

I am 95% sure they will fit. I have a set in my garage. The only mod that needs to be done to mine is remove the ball joint for the HICAS and put a bushing in it.

[Slo_240sx]

ok well I bought them so I will let everyone know if they do fit or not.

can I ask as to why you got r32 hubs?

[crxcess]

$10 bux for 5 lugs

also im going to be working with the fronts so the hicas isnt an issue for me, I dont think? maybe the lower control arms that are included will help
Modified by crxcess at 4:04 PM 2/28/2005

[IveBeenBad]

They should be the same as 300ZX hubs. MY R32 rear subframe is coming with the hubs and rotors

[crxcess]

ok, i took the skyline front hubs apart and found that they will not fit a 240sx. they are the same as a 300zx front hub assembly. they bolt onto the spindle from the back like a 300zx not from the front like a 240sx.

[sean8564]

No they will not work with the 240 you just need to get s-14 ones.

[300Plus]

I need a set of 240 SE 5 lug front hub myself. Wheres the best and cheapest to find, this should help us all out.

[sean8564]

I got my front hubs from a junkyard for like 200 bucksMy rears came with my R32 subframe from http://www.jhotimports.com I paid 200 for it i got 5 lug Rear Lsd Diff big brake rearsMy front calipers i got off of a GTST r32 for 60 bucks also from jhot won on Ebay.Rotors i bought from Nopi Brembo Blanks for 25 each Finally whells I got a set of R32 GTR wheels from http://www.jarcoinc.com for 152.50

[Carl H]

Finally whells I got a set of R32 GTR wheels from http://www.jarcoinc.com for 152.50

are you sure you got gtr wheels?i paid nearly 1k for my mint condition r32 gtr wheels......last set i saw on ebay was forever ago.the gts-t wheels look exactly like the gtr wheels cept they are 6.5" wide and are bronze instead of gunmetal......

[sean8564]

ohh yes it came off of ther Rb26 clip they have Gtr seats for sale every now and then the last one i saw from the went for 75 dollars. on Ebay oh and they were curbed but still round I had them refinshed now.

[POOPmouth]

? can u use the r32 front hubs if you have the r32 subfram -

also can u just use the r32 brake lines for the rearand front

[Coolwhip]

? can u use the r32 front hubs if you have the r32 subfram -

also can u just use the r32 brake lines for the rearand front

the rear subframe has nothing to do with the front hubs so regardless.. if they don't fit..

[POOPmouth]

? was asking if you can use the front hubs if your using the FRONT SUBFRAM ? that was the ? nothing to do with rear - point taken